Reading from an RFID Reader (MFRC522)

[librecomputer]

Instead of the Raspberry Pi SPI instructions, you can enable SPI on Le Potato like this:

How to Enable SPI on AML-S905X-CC Le Potato

Le Potato supports hardware SPI on the 40-pin GPIO header with the same pinout as Raspberry Pi 2/3/4 Model B/B+ boards. MOSI on pin 19 MISO on pin 21 SCLK on pin 23 CE0 on pin 24 CE1 on pin 26 They can be used directly with hardware drivers or exposed as /dev/spidev0.0 and /dev/spidev0.1. If you only have 1 SPI slave device, you only need CE0 on pin 24. To activate /dev/spidev0.0, run: sudo ldto enable spicc spicc-spidev If you have two SPI slave devices, you need both CE0 on pin 24 and CE…

Then just run the Python script.